I woould love to go wide 5! Maybe in the (near) future....
vrijdag 5 maart 2010
zondag 21 februari 2010
Weber carbs
Last summer i bought a pair Weber 34 ICT carbs with some worn out bushes (the ones on the throttle-shaft). It makes the engine run a bit bad.. So last week i finally started to dismantle one of the carbs.
I also bought a very handy book!
These screws have to come loose!
The bushes are marked with the red arrow.
On the dutch bay-forum there was someone who offered to help me out with replacing the bushes and check the other parts of the carbs. I asked him about placing a fuel regulator because the Weber carbs like lesser pressure than the (standard) fuelpump will give. It wouldn't be nessary if the float needles close perfect.
This guy is somebody with a lot of knowlege on vw engines. Here's a photo of his own oldspeed baywindow engine:
This engine has enough torque and power, even from 3rd gear going trough a corner and it picks up beautifull and there are no rpm drops between the gears.
Engine specs: stock crank,1641cc, Schleicher 292 degree cam, Riechert 34 pci carb set(polished inlet manifolds), NOS stock heads with a compressio ratio of 1:7.8 and polisched inlets ports and valves, Bosch 010 distibutor,the crank, rods and flywheel are fine ballanced. This engine runs with a modified beetle exhaust. And the gearbox code is CE.
This guy is also going to help me place the Weber carbs. It will take about 2 months due to work. I don't mind as i can learn a lot from him!
I also bought a very handy book!
These screws have to come loose!
The bushes are marked with the red arrow.
On the dutch bay-forum there was someone who offered to help me out with replacing the bushes and check the other parts of the carbs. I asked him about placing a fuel regulator because the Weber carbs like lesser pressure than the (standard) fuelpump will give. It wouldn't be nessary if the float needles close perfect.
This guy is somebody with a lot of knowlege on vw engines. Here's a photo of his own oldspeed baywindow engine:
This engine has enough torque and power, even from 3rd gear going trough a corner and it picks up beautifull and there are no rpm drops between the gears.
Engine specs: stock crank,1641cc, Schleicher 292 degree cam, Riechert 34 pci carb set(polished inlet manifolds), NOS stock heads with a compressio ratio of 1:7.8 and polisched inlets ports and valves, Bosch 010 distibutor,the crank, rods and flywheel are fine ballanced. This engine runs with a modified beetle exhaust. And the gearbox code is CE.
This guy is also going to help me place the Weber carbs. It will take about 2 months due to work. I don't mind as i can learn a lot from him!
dinsdag 9 februari 2010
vrijdag 13 november 2009
Last week a busfriend of mine called Max took care of some cracks in the paint. After taking of some old paint with the sanding machine it wasn't so bad.
No rustdevil in the bare metal!!
After discovering the cracks this summer, i have been putting on carwax a few times, even in the cracks. And it looks like it helped!
Taking away loose paint.
Max sanding the spot.
After the sanding.
First layer of polyester fill, second layer to follow.
Spraying primer, also two layers
The result! Whatertight!
The bus couldn't park insides Max's garage and the outside temparture was to low to spray on the beautiful Savannabeige.
We 'll do it in the coming spring.
Next project will be putting on double carbs on the 1641 cc engine!
No rustdevil in the bare metal!!
After discovering the cracks this summer, i have been putting on carwax a few times, even in the cracks. And it looks like it helped!
Taking away loose paint.
Max sanding the spot.
After the sanding.
First layer of polyester fill, second layer to follow.
Spraying primer, also two layers
The result! Whatertight!
The bus couldn't park insides Max's garage and the outside temparture was to low to spray on the beautiful Savannabeige.
We 'll do it in the coming spring.
Next project will be putting on double carbs on the 1641 cc engine!
woensdag 23 september 2009
dinsdag 15 september 2009
zaterdag 12 september 2009
Update
Photo's say more then words....
Holiday in the Netherlands
Campingsite in Otterlo, near park Hoge Veluwe.
The neighbour, a '58 Ford Ambulance.
Time to do a small job at the Surfbus.
Two busses got 40 years old. So time for a party!
Meeting from dutch bayclub VCT2 at Loon op Zand.
Early bays!!
Me (left) and another bay-owner fixing the bus.
The neighbours. Allso a '71 with Dormobile roof and interior.
Clean '68 from Maurice!
Another reason to drive a pickup!
BBQ-time!
Next day. Time for cleaning up!
This winter I'll fix some damage in the paint. And i am going to putt 2 Weber 34 carbs+ 009 ignition on the engine.
Some more photo's;
Surfbus with Surfpanel!
This is the start of a serie photo's in TTv about Volkswagens and their owners.
Keverdag Schagen 2009.
Holiday in the Netherlands
Campingsite in Otterlo, near park Hoge Veluwe.
The neighbour, a '58 Ford Ambulance.
Time to do a small job at the Surfbus.
Two busses got 40 years old. So time for a party!
Meeting from dutch bayclub VCT2 at Loon op Zand.
Early bays!!
Me (left) and another bay-owner fixing the bus.
The neighbours. Allso a '71 with Dormobile roof and interior.
Clean '68 from Maurice!
Another reason to drive a pickup!
BBQ-time!
Next day. Time for cleaning up!
This winter I'll fix some damage in the paint. And i am going to putt 2 Weber 34 carbs+ 009 ignition on the engine.
Some more photo's;
Surfbus with Surfpanel!
This is the start of a serie photo's in TTv about Volkswagens and their owners.
Keverdag Schagen 2009.
Abonneren op:
Posts (Atom)